Cleaning the cassette of my road bicycle thoroughly
Cleaning the cassette of a bicycle is an essential maintenance task that helps improve the performance and lifespan of your bike's drivetrain components.
By doing regular maintenance you will save money and keep your bicycle running smoothly.
I do regular maintenance of my road bicycle. I clean the chain, the cassette and the sprockets. The interval depends on the weather conditions and the number of kilometers I made.
I have been quite busy lately, so I didn't take the time to clean my bicycle properly. And you could clearly tell that by the state of my rear cassette.
The rear gears collect quite a bit of grease over time which makes the gears sticky and causes mud and sand to stick to them. This makes both your gears as your chain wear out faster.
The small sprockets of my derailler even look worse...
With regular cleaning I use an old dishwashing brush and some degreaser to clean my gears, but every now and then I completely take the gears apart to do some deep cleaning. And since I have an extra long weekend because it's easter, I decided to do so.
Tools
You do need some tools to remove your cassette. At first you need to remove your wheel. I have a quick lock, so this is very easily done without any tools. But for removing the casette you need two tools;
A cassette lockring tool and a chain whip. First you put the lockring into the cassette and then you apply the chain whip over one of the gears. You need to do this because else the gears will keep on turning.
When the cassette comes off be sure to remove it as a whole. The cassette exists of multiple blades and spacers in between.
After removing the cassette I cleaned the freehub which was all sandy.
I've put the cassette on an old cloth and started cleaning them one by one. I started with the largest. This way I could place them back on the freehub in the right order.
As you can see in the photo below the grease clutters up in between the gears. You don't notice this when you keep the cassette on your bicycle.
I scrape the excessive grease off and use a regular dishwashing brush with some degreaser to make it shiny again.
It's quite a labour intensive job, but the results are great. Here you can see the result when I have cleaned a few of the gears.
It took me about an hour, but the result is worth it. It looks almost brand new!
Don't forget to clean your chain as well when you're finished or else your cassette will be greasy again soon.
I hope you enjoyed this bicycle maintenance blog.
FriendlyMoose
Creating blogs about photography, cycling, gardening, craft beer and more...
Every week I create a post with an overview of all the photography contests on Hive. You can find the weekly overview post by checking the #photocontests tag.
I also organise a weekly photography contest myself; the POB Photocontest. This weekly contests has a new subject every week and you can win POB tokens and Ecency points.
Check out the posts with the #pobphotocontest tag.
The Cycling Community
The Cycling Community is for everyone who rides a bicycle or is interested in cycling in any form.
You can post anything as long as it has to do with cycling; your bicycle, a ride you made, bike maintenance or cycling news.
Create your cycling related blog in the Cycling Community!
Also check out our Discord Channel!
You can support the Cycling Community by delegating HP.
The HP will be used to support cyclist on Hive!
You can do so by clicking one of the links below or choose your own amount.
25 HP - 50 HP - 100 HP -250 HP - 500 HP
This post was upvoted by the Cycling Community
Subscribe to the Cycling Community and share your cycling related posts with us.
Join our Discord Channel if you want to chat about cycling.
You can support the Cycling Community by delegating HP
| 25 HP | 50 HP | 100 HP | 250 HP | 500 HP |
Whoa looks like new! Was quite necessary no? 🤪
Yes it surely was 😃
You really did a great job on this, I learnt some tips on my bicycle cassette maintenance 👍
Thanks!
!LOL
Posted using Hive Images
lolztoken.com
It's just something I can see myself doing.
Credit: reddit
@friendlymoose, I sent you an $LOLZ on behalf of hivephoto
(6/10)
ENTER @WIN.HIVE'S DAILY DRAW AND WIN HIVE!
Holy shit! Just as I scroll down on the feed after posting, I see that we posted about the same subject. Funny. Yours is miles dirtier than mine though hahahahahaha
Haha. That shows it's an important subject!
Mine was dirtier indeed. And that for a road cyclist.
But I do cycle in bad weather conditions as well.
Are you using wet lube? Oils tend to create that sticky gunk.
Cassette maintenance is one of the tough task for me. I don't like blackish and sticky grease on my hands. Mate, you have done a really wonderful job.
Thanks. Me neither. That's why I wear gloves.
Excellent, you are giving me good ideas for my new post, I think it's great but I still don't dare to disassemble my bike like that... But I'm sure I'll learn here
Just start small.
It helps to donit organised. Keep all parts together and place them on the order you remove them.
It also helps to take some pictures ofnthe situation before you disassemble things.
Tomaré los consejos de hecho hoy creo que haré un video y te mostraré lo que le pasó a la bicicleta de mi hijo... Tengo un dolor de cabeza por eso.
Ya lo veras.
Hello friendlymoose!
It's nice to let you know that your article won 🥇 place.
Your post is among the best articles voted 7 days ago by the @hive-lu | King Lucoin Curator by fantagira
You and your curator receive 0.0180 Lu (Lucoin) investment token and a 10.33% share of the reward from Daily Report 254. Additionally, you can also receive a unique LUGOLD token for taking 1st place. All you need to do is reblog this report of the day with your winnings.
Buy Lu on the Hive-Engine exchange | World of Lu created by @szejq
STOPor to resume write a wordSTARTTe felicito pues eres muy valiente al desmontar todas esas piezas de la bicicleta. Creo, que no me atrevo a tanto jajajaja.