3D for the win ?/Reblog Lottery
Welcome in this post I share a sneak peak into the world of rapid prototyping and other related drama.
So traffic is crazy around where I live and so I opted for an electric scooter.
It's great and saves a lot of time but I had a little issue I had a small crash and the back fender fell off, thats not great if its raining or wet as the back wheel flings up all the water and dirt at ya.
The scooter still works great but if it's wet conditions one can get mucked up pretty bad, the issue is that the manufacturer is not selling a replacement fender, so there is only one reasonable solution at my disposal design and print my own replacement east peasey right ?
NOPE!🤣
above are some prototypes and test pieces. there are actually a few more that are not in the picture
I started from scratch and used the picture above with a reference Canadian dime to get the base shape.
Right bellow was my first reasonable prototype I set it up and it seemed to work but it snapped fairly quickly I noticed one of the screw holes was too loose and I figured maybe that what caused the issue.
Right bellow is the first one I tried It was not very effective and I still got soaked
It was just some puddles no rain and it only did a little bit to keep the spray off me
I would much rather buy a replacement but like mentioned above its not an option I already spend a fair bit of time and money on this fix.
The first pic in this post is my latest prototype and it seemed reasonably strong I beefed up the base quite a fair bit, however it broke too it seems 3 out of the 4 screws holes are loose and no longer can hold it, to prevent the fender from sanding down the tire I had to push my foot on it , when I got home I realize that snapped some of the fender.
So now I have to print another that is slightly thicker and will have to drill the screw holes and rethread them to a bigger size I hope that will be the last of it, if that dosent work Im buying a new scooter 🤣
Reblog lottery
We got 47 participants for our reblog lottery this time around.
@blitzzzz @bntcamelo @chaosmagic23 @chyxille @cup-bearer @daddydog @daniasi @dgi @duckmotor @dynamicgreen @ecencypoints @ekads @ene22 @florakese @fonestreet @guurry123 @henruc @hive.games @hjrrodriguez @jenam @jhonnygo @jorgebgt @kungfukid @ladymisa @miriammarga @mirroredspork @monsterbuster @mxm0unite @necho41 @oadissin @olaf.gui @phasewalker @polygonpirate @psyber-x @rebe.torres12 @rosauradels @scfather @seki1 @servelle @trautenberk @vaynard86 @vrezion @vrezyy @ydm6669 @ynwa.andree @youloseagain and @yova
and the winner this time around is....
so close but it's a dud, better luck next time.
@fonestreet ! Congratulations enjoy your 10% profit share on this post and 5 HBI units , more about
The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share on my next post and 5 HBI units (bonus wheel)
This is all done automatically and I apply the winner to be a beneficiary for the post.
Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.
I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.
@bitcoinman's bits of wisdom
- Invest only what you can afford to lose and be mindful of the potential risks.
- Unless you can accept delivery stay away from futures and stick to physical.
- Leverage is a great tool for losing money fast.
- Numismatics for the lows stick to smart stacking baby.
- Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES
You can find out more about the #silvergoldstackers community in this post here
Weekly Post Schedule
| Day | Post |
|---|---|
| Monday | Art&3D |
| Tuesday | |
| Wednesday | |
| Thursday | |
| Friday | Stacker of the week |
| Saturday | Lazy Saturday post |
| Sunday |
Profit share
10% of this post earnings go to @fonestreet for being our reblog lottery winner.
10% goes to the HOC community account having a hard time with the
That's it for today's post thanks for stopping by your support is truly appreciated.
!hiqvote
I am always in favor of making repairs, but I know that (on occasion) there are things that are cheaper to buy back than to work on repairing them.
It seems that this case that you tell is, precisely, a good example of this.
!ALIVE !PGM !BBH
Yeah like mentioned didn't have a choice only the diy route!DOOK
You just got DOOKed!
@bitcoinman thinks your content is the shit.
They have 7/400 DOOK left to drop today.
Learn all about this shit in the toilet paper! 💩
Admire the innovation and the willingness to experiment!
!PIMP
You must be killin' it out here!
@mirroredspork just slapped you with 1.000 PIMP, @bitcoinman.
You earned 1.000 PIMP for the strong hand.
They're getting a workout and slapped 1/1 possible people today.
Read about some PIMP Shit or Look for the PIMP District
Always , that's be the way if you ask me !DOOK
You just got DOOKed!
@bitcoinman thinks your content is the shit.
They have 6/400 DOOK left to drop today.
Learn all about this shit in the toilet paper! 💩
Bro thos scooters are lot of fun, easy to go work tho.
The fender looks perfect, ofc u can make some time for next weekend for s DIY work there if needed, it have back wheel brakes?
Yeah only back breaks , the fender is fine now but need to drill and prepare it for bigger screws!DOOK
You just got DOOKed!
@bitcoinman thinks your content is the shit.
They have 5/400 DOOK left to drop today.
Learn all about this shit in the toilet paper! 💩
!GIF fuck yea!
Via Tenor
Buying a new scooter seems like the more reasonable option 😂😂
You get me man, it's like 150 bucks for this experimentation not counting the time I took but also learning and all that so no regrets 🤣 !DOOK
Nice idea to print the fender. My first thought was using carbon in some way.
Congrats to the winner!
!ALIVE !BBH
I tried with carbon fiber infused filaments but it was so abrasive that it ruined my nozzle in less then 12 hours, easy fix and cheap replacement but still , need a Hardened steel nozzle for some materials !DOOK
You just got DOOKed!
@bitcoinman thinks your content is the shit.
They have 3/400 DOOK left to drop today.
Learn all about this shit in the toilet paper! 💩
I understand... Good luck with your print.
You received an upvote of 100% from Precious the Silver Mermaid!
Please remember to contribute great content to the #SilverGoldStackers tag to create another Precious Gem.
That's awesome. I love making stuff with my printer.
Yeah it's fun when everything is working 🤣 !DOOK !PIMP
You must be killin' it out here!
@bitcoinman just slapped you with 5.000 PIMP, @fat-elvis.
You earned 5.000 PIMP for the strong hand.
They're getting a workout and slapped 2/3 possible people today.
Read about some PIMP Shit or Look for the PIMP District
You just got DOOKed!
@bitcoinman thinks your content is the shit.
They have 4/400 DOOK left to drop today.
Learn all about this shit in the toilet paper! 💩
reblogged
Congratulations @bitcoinman! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPCheck out our last posts:
@bitcoinman, the HiQ Smart Bot has recognized your request (1/3) and will start the voting trail.
In addition, @bitcoinman gets !PIZZA from @hiq.redaktion.
For further questions, check out https://hiq-hive.com or join our Discord. And don't forget to vote HiQs fucking Witness! 😻
Keep up the good work. 👏🎵
Dear beloved Hive creator,
Coding poet Gudasol here to support you sharing your art + life on Hive.
As a fellow creator, I know how hard it is to get the word out there.
I built cXc.world to help creators like us get more support from the blockchain community + beyond.
Share your music on cXc.world, and copy the Markdown for a easy post includes embedded players for Spotify, Youtube, Soundcloud.
That way, you can earn HIVE + stack streams on centralized platforms, as they do still matter.
Not a music creator? No problem. You can still use cXc.world to find + share music you love.
What's next?
Preview the next evolution of cXc, Tetra.earth.
Expose local music from your area!
We're helping grassroots musicians, and you can too by adding their music (no sign up or WAX account required).
Join our community 🐬
Find fellow music lovers in cXc's Discord
Bad news: Saying see you later to Hive! 👋
We didn't get the needed support to continue cXc.world on Hive, as our DHF proposal lacked votes, but [Good News Everyone] cXc.world will add a Markdown copy button, allowing you to easily share your music + music you find on Hive.
For now, we're on WAX, with tools you can use to mint your own Music/Media NFT collection.
Curious about the future of Earth + ET relations? New economic systems?
Find more apps + art from Gudasol
Want to build tools like I used to share this?
I'd love to show you some tips on AI Code generation